|
|
Post by alleyoop on Sept 26, 2012 23:04:05 GMT -6
At this point the only thing I can tell you is TURN THE IDLE SPEED SCREW COUNTER CLOCKWISE to lower the IDLE. And if the IDLE DOES NOT GO DOWN turning it COUNTER CLOCKWISE that means the BUTTERFLY is either stuck open to much and is NOT CLOSEING when you turn the IDLE SPEED SCREW counter clockwise.
Alleyoop
|
|
Sophomore
Currently Offline
Posts: 91
A+'s: 0
Joined: Jul 9, 2011 0:21:34 GMT -6
|
Post by chrispetty1 on Sept 26, 2012 23:13:00 GMT -6
no opposite as in my threads are all the way through the bracket unlike the first picture and the throttle control is against the idle speed screw
|
|
|
|
Post by alleyoop on Sept 26, 2012 23:18:46 GMT -6
That is fine you just happen to have a shorter cable. But HOW FAR IS THE IDLE SPEED SCREW Screwed down PUSHING ON THE Throttle control. Tell you what Turn the Idle Speed screw until it DOES NOT TOUCH THE THROTTLE CONTROL wheel then Turn it CLOCKWISE 1 Full turn and try that.
Alleyoop
|
|
|
|
Post by alleyoop on Sept 26, 2012 23:25:50 GMT -6
|
|
|
|
Post by justbuggin2 on Sept 27, 2012 9:48:13 GMT -6
it maybe the thottle cable is sticking and keeping the butterfly open
|
|
..BAD TO THE BONE..
